The product is a water-based environmentally friendly waterproof coating made of petroleum asphalt as the base material, high-quality rubber as the modifier, natural nanomaterials as the filler, and supplemented by high-molecular polymers scientifically formulated.The product can be cold-constructed on a humid base layer, and the rubber polymer is distributed in a network in the coating system.After the coating film dries, it has excellent acid, alkali and weather resistance.A seamless overall waterproof layer can be formed on the waterproof base layer, and the construction is simple and fast.

Product features：　

◎ Because the polymer is under the action of temperature and machinery, the asphalt enters its three-dimensional mesh structure and becomes an organic polymer elastomer, which greatly improves the performance of the asphalt and gives the product rubber characteristics.

◎ It is convenient for construction, has a wide range of applications, and has obvious advantages for the construction of complex parts.

◎ Easy maintenance, only partial maintenance of the damaged parts is required, and the original waterproof effect can still be achieved.

◎ After curing, a seamless and complete elastic waterproof layer is formed, which improves the waterproof and impermeable ability of construction projects, which cannot be achieved by coil products.

Construction process：　

Waterproof coating construction

◎ Coating primer: Apply the coating material evenly on the surface of the base layer, and do not accumulate or expose the white to the bottom when brushing. The coating amount should be 0.2~0.3kg/m2. The primer can be cured for more than 5h before the next process can be carried out. Construction.

◎ Waterproof coating construction: The coating material should be brushed a small amount of times to make the coating thickness uniform and reduce air bubbles.The amount of coating at a time is 0.4～0.5kg/m2, and the thickness is about 0.4～0.5mm.After the first coating of the film, it generally needs to be cured for more than 5h, until the finger touch is basically non-stick, and then the second coating is carried out in the vertical direction. The female corner of the base plate and the wall should be laid with fiber non-woven fabric for enhanced treatment.Around the pipes, equipment foundations, and floor drains, the yin and yang corners of the ground should be strengthened and painted, and the walls should be coated within 30 centimeters from the ground, and should be painted 3 to 4 times.It is appropriate to brush the flat base layer 2 to 3 times.According to national regulations, the thickness of the waterproof coating film is qualified as not less than 2mm.

Polymer Modified Asphalt Waterproof Coating is a revolutionary product that offers superior waterproofing performance. This coating is specifically designed to provide long-lasting protection against water infiltration.

The key feature of Polymer Modified Asphalt Waterproof Coating is its high polymer content, which significantly enhances its durability and flexibility. It can effectively adapt to various surface conditions and resist cracking and deformation.

The modified asphalt in the coating forms a seamless and impermeable membrane that prevents water from penetrating the substrate. It has excellent adhesion to different materials, ensuring a secure bond.

Another important aspect is its resistance to weathering and UV rays. It can withstand the harshest environmental conditions without deteriorating.

This coating is easy to apply and provides quick drying, minimizing downtime during construction or renovation projects. It is suitable for a wide range of applications, including roofs, basements, and other areas where waterproofing is crucial.