Products
蒙自Polyethylene Propylene (Polyester) Nylon Polymer Waterproof Membrane
Category:
蒙自Polymer Waterproof
Tel: 0595-86102626
Product Description
Polyethylene propylene (polyester) nylon polymer waterproof membrane is mainly based on polypropylene non-woven fabric and polyethylene as the main raw materials, and is manufactured by adding additives to improve its performance. It is a composite waterproof material with four layers of sheet-like materials, including enhanced protective layer, anti-aging layer, waterproof layer and adhesion-enhancing layer.
Specification model:
Specification: 400g/m2-1200g/m2
Size: width 1200mm, 1500mm
Length: 100m/roll, 50m/roll
Color: Any color can be produced according to customer needs
Product features:
◎ The product is composed of different materials, and the product performance has been significantly improved, especially the product has a separate anti-aging layer, which greatly improves the service life of the product, which can reach more than 50 years.
◎ The upper and lower surfaces of this product are rough, and the non-woven fibers have an irregular cross structure, forming a vertical mesh, which makes it have high tensile strength, strong impermeability, good low temperature flexibility, small expansion coefficient, low temperature rise effect, strong deformation adaptability, and large friction coefficient. It can be used in combination with a variety of adhesives, and the bonding effect is good.
◎ When this product is bonded to the cement base surface, the cement slurry can be used as the adhesive. The cement slurry can directly enter the mesh on the surface of the coil and solidify into one with the cement. The cement slurry does not have aging, mildew, hydrolysis and other problems, so the bonding is permanent and firm, and it should not be peeled off.
◎ The surface of the waterproof layer after construction with this product can be directly decorated (such as pasting ceramic tiles, floor tiles, mosaics, grout, etc.).
◎ The use of this product for construction has no special requirements for the moisture content of the leveling layer (base layer), as long as there is no water, the construction can be carried out, and the construction quality is reliable.
◎ This product is a resin-based polyethylene series polymer waterproof membrane, which is a non-toxic, non-polluting, green and environmentally friendly product.