A substitute for SBS coil, it is made of one-component water-based high-elastic rubber and organic environmentally friendly polymer synthesized by physical principles. It is suitable for all roofing, roads and bridges, and all places that need to be waterproof!The floating soil on the ground is cleaned, the brushing is simple, and you can operate it by yourself!The commonly used SBS coil requires a professional waterproof master to use a gas tank to add fire to barbecue. It is complicated and troublesome to construct, and it is dangerous and prone to fire accidents. Therefore, the liquid coil will be widely used in civil buildings and projects in the future. The prospects are very good!Liquid coil can also be used for waterproof construction of tin tiles, mortar surfaces, and concrete surfaces. The most important thing is simple brushing and good durability!

Product features：

◎ Because the polymer is under the action of temperature and machinery, the asphalt enters its three-dimensional mesh structure and becomes an organic polymer elastomer, which greatly improves the performance of the asphalt and gives the product rubber characteristics.

◎ It is convenient for construction, has a wide range of applications, and has obvious advantages for the construction of complex parts.

◎ Easy maintenance, only partial maintenance of the damaged parts is required, and the original waterproof effect can still be achieved.

◎After curing, a seamless, complete elastic waterproof layer is formed

Construction process：

Waterproof coating construction

◎ Coating primer: Apply the coating material evenly on the surface of the base layer, and do not accumulate or expose the white to the bottom when brushing. The coating amount should be 0.2~0.3kg/m2. The primer can be cured for more than 5h before the next process can be carried out. Construction.

◎ Waterproof coating construction: The coating material should be brushed a small amount of times to make the coating thickness uniform and reduce air bubbles.The amount of coating at a time is 0.4~0.5kg/m2, and the thickness is about 0.4~0.5mm.After the first coating of the film, it generally needs to be cured for more than 5h, until the finger touch is basically non-stick, and then the second coating is carried out in the vertical direction. The female corner of the base plate and the wall should be laid with fiber non-woven fabric for enhanced treatment.Around the pipes, equipment foundations, and floor drains, the yin and yang corners of the ground should be strengthened and painted, and the walls should be coated within 30 centimeters from the ground, and should be painted 3 to 4 times.It is appropriate to brush the flat base layer 2 to 3 times.According to national regulations, the thickness of the waterproof coating film is qualified as not less than 2mm.

With outstanding fluid dynamics, the liquid coil offers exceptional circulation efficiency. Its enhanced flow characteristics allow for rapid and even heat distribution, significantly boosting heat exchange performance. This not only improves system responsiveness but also reduces energy consumption by maintaining consistent thermal control with less input. The result is a balance of peak efficiency and low operational overhead.

Whether used in compact systems or complex networks, the Liquid Coil delivers unmatched performance in thermal regulation. Its combination of corrosion resistance, thermal stability, and flow efficiency sets a new standard for heat exchange technology. Choose the Liquid Coil to optimize your system’s reliability, efficiency, and longevity.