The product is a water-based environmentally friendly waterproof coating made of petroleum asphalt as the base material, high-quality rubber as the modifier, natural nanomaterials as the filler, and supplemented by high-molecular polymers scientifically formulated.The product can be cold-constructed on a humid base layer, and the rubber polymer is distributed in a network in the coating system.After the coating film dries, it has excellent acid, alkali and weather resistance.A seamless overall waterproof layer can be formed on the waterproof base layer, and the construction is simple and fast.

Product features：　

◎ Because the polymer is under the action of temperature and machinery, the asphalt enters its three-dimensional mesh structure and becomes an organic polymer elastomer, which greatly improves the performance of the asphalt and gives the product rubber characteristics.

◎ It is convenient for construction, has a wide range of applications, and has obvious advantages for the construction of complex parts.

◎ Easy maintenance, only partial maintenance of the damaged parts is required, and the original waterproof effect can still be achieved.

◎ After curing, a seamless and complete elastic waterproof layer is formed, which improves the waterproof and impermeable ability of construction projects, which cannot be achieved by coil products.

Construction process：　

Waterproof coating construction

◎ Coating primer: Apply the coating material evenly on the surface of the base layer, and do not accumulate or expose the white to the bottom when brushing. The coating amount should be 0.2~0.3kg/m2. The primer can be cured for more than 5h before the next process can be carried out. Construction.

◎ Waterproof coating construction: The coating material should be brushed a small amount of times to make the coating thickness uniform and reduce air bubbles.The amount of coating at a time is 0.4～0.5kg/m2, and the thickness is about 0.4～0.5mm.After the first coating of the film, it generally needs to be cured for more than 5h, until the finger touch is basically non-stick, and then the second coating is carried out in the vertical direction. The female corner of the base plate and the wall should be laid with fiber non-woven fabric for enhanced treatment.Around the pipes, equipment foundations, and floor drains, the yin and yang corners of the ground should be strengthened and painted, and the walls should be coated within 30 centimeters from the ground, and should be painted 3 to 4 times.It is appropriate to brush the flat base layer 2 to 3 times.According to national regulations, the thickness of the waterproof coating film is qualified as not less than 2mm.

Another advantage of Polymer Modified Asphalt Waterproof Coating is its easy application process. It can be sprayed, rolled, or brushed on, making it suitable for different project sizes and complexities. It dries quickly, minimizing downtime and allowing for prompt resumption of normal activities.

In addition, this coating offers good flexibility, enabling it to accommodate the natural movement and expansion/contraction of structures without cracking or peeling. It also has good resistance to chemicals and abrasions, further enhancing its suitability for various environments.

With Polymer Modified Asphalt Waterproof Coating, you can be confident in the long-term protection and performance of your structures. It is a trusted solution for professionals and homeowners alike, providing peace of mind and reliable waterproofing. Invest in this high-quality coating and enjoy a dry and protected environment for years to come.