Polyethylene propylene (polyester) nylon polymer waterproof membrane is mainly based on polypropylene non-woven fabric and polyethylene as the main raw materials
Key words:
Classification:
Polymer Waterproof
Hotline:
E-mail：
Polyethylene Propylene (Polyester) Nylon Polymer Waterproof Membrane
Polyethylene propylene (polyester) nylon polymer waterproof membrane is mainly based on polypropylene non-woven fabric and polyethylene as the main raw materials, and is manufactured by adding additives to improve its performance. It is a composite waterproof material with four layers of sheet-like materials, including enhanced protective layer, anti-aging layer, waterproof layer and adhesion-enhancing layer.
Specification model：
Specification: 400g/m2-1200g/m2
Size: width 1200mm, 1500mm
Length: 100m/roll, 50m/roll
Color: Any color can be produced according to customer needs
Product features：
◎ The product is composed of different materials, and the product performance has been significantly improved, especially the product has a separate anti-aging layer, which greatly improves the service life of the product, which can reach more than 50 years.
◎ The upper and lower surfaces of this product are rough, and the non-woven fibers have an irregular cross structure, forming a vertical mesh, which makes it have high tensile strength, strong impermeability, good low temperature flexibility, small expansion coefficient, low temperature rise effect, strong deformation adaptability, and large friction coefficient. It can be used in combination with a variety of adhesives, and the bonding effect is good.
◎ When this product is bonded to the cement base surface, the cement slurry can be used as the adhesive. The cement slurry can directly enter the mesh on the surface of the coil and solidify into one with the cement. The cement slurry does not have aging, mildew, hydrolysis and other problems, so the bonding is permanent and firm, and it should not be peeled off.
◎ The surface of the waterproof layer after construction with this product can be directly decorated (such as pasting ceramic tiles, floor tiles, mosaics, grout, etc.).
◎ The use of this product for construction has no special requirements for the moisture content of the leveling layer (base layer), as long as there is no water, the construction can be carried out, and the construction quality is reliable.
◎ This product is a resin-based polyethylene series polymer waterproof membrane, which is a non-toxic, non-polluting, green and environmentally friendly product.
Previous Page
Previous Page
Polyvinyl Chloride (PVC) Waterproof Membrane
Related Products
Elastomer \ Plastomer Modified Asphalt Waterproof Membrane
SBS elastomer modified asphalt waterproof membrane is based on SBS (styrene-butadiene-styrene) thermoplastic elastomer modified asphalt as the dip coating material
Colored asphalt tiles are made of glass fiber felt as the carcass.
Modified Asphalt Waterproof Membrane For Roads And Bridges
The modified asphalt waterproof membrane for roads and bridges is made of polyester felt as the tire base
Modified Asphalt Waterproof Membrane For High-Speed Rail
The modified asphalt waterproof membrane for high-speed rail is a kind of polymer-modified leaching waterproof membrane made of polymer-modified asphalt as the coating layer
Polyethylene Propylene (Polyester) Nylon Polymer Waterproof Membrane
Polyethylene propylene (polyester) nylon polymer waterproof membrane is mainly based on polypropylene non-woven fabric and polyethylene as the main raw materials
Polyvinyl Chloride (PVC) Waterproof Membrane
Polyvinyl chloride (PVC) waterproof membrane is a kind of polymer waterproof sheet with excellent performance.
Thermoplastic Polyolefin (TPO) Waterproof Membrane
Thermoplastic polyolefin (TPO) waterproof membrane (referred to as TPO waterproof membrane) is made of TPO resin based on the weather resistance
EPDM Rubber Waterproof Membrane
EPDM rubber waterproof membrane adopts the international advanced level of cold-fed extrusion continuous vulcanization process equipment,
Product Consulting
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Address: 973 Hedong Road, Huli District, Xiamen City, Fujian Province
Hotline:400-1521-990
Telephone:0592-5228263
Mobile:86-18030303739
E-mail：chenli@chenlifs.com
Website:http://www.chenlifs.com