This product is a new type of waterproof material that has emerged in developed countries such as Europe, America, Japan, and South Korea in recent years.
Key words:
Classification:
Waterproof Coatingon

Hotline:
E-mail:
Polymer cement (JS) waterproof coating
This product is a new type of waterproof material that has emerged in developed countries such as Europe, America, Japan, and South Korea in recent years. It is a two-component water-based building waterproof coating prepared with building polymer emulsion and special cement as the main raw materials and other admixtures, so it has the waterproof characteristics of “rigidity and softness”.
Product features:
◎ Environmentally friendly products, water-based and odorless, easy to construct, wide range of applications, and have obvious advantages for the construction of complex parts.
◎ After curing, a seamless and complete elastic waterproof layer is formed, which improves the waterproof and impermeable ability of construction projects, which cannot be achieved by coil products.
◎ The coating film has high strength and extensibility, and is highly adaptable to cracking or expansion of the base layer.
◎ Easy maintenance, only partial maintenance of the damaged parts is required, and the original waterproof effect can still be achieved.
◎ This product has bright colors and can play a role in decoration and beautification. The moisture content of the base layer is not strict, and the wet base surface can be constructed.
Precautions:
◎ If the coating (especially the primer) has precipitation, it should be stirred evenly at any time.
◎ The coating should be as uniform as possible, and there should be no local deposits, and it is required to roll and brush several times to test that there are no bubbles between the coating and the base layer, and the bonding is strict.
◎ Each layer of coating must be recessed in accordance with the prescribed amount, and must not be too thick or too thin. If the thickness of the final waterproof layer is not enough, one or more layers can be added, and the total number of coating times is not less than 3 layers.The time interval between the layers is subject to the dryness and non-stick of the previous layer of coating film (generally it takes 3-6 hours, the on-site temperature is low, the humidity is high, the ventilation is poor, and the drying time is longer, and vice versa is shorter).
◎ It cannot be constructed below 0℃ or in rain, and it should not be constructed in a particularly humid and unventilated environment, which will affect film formation.
Previous Page
Previous Page
Water-Based (951) Polyurethane Waterproof Coating
Related Products
Elastomer \ Plastomer Modified Asphalt Waterproof Membrane
SBS elastomer modified asphalt waterproof membrane is based on SBS (styrene-butadiene-styrene) thermoplastic elastomer modified asphalt as the dip coating material
Colored asphalt tiles are made of glass fiber felt as the carcass.
Modified Asphalt Waterproof Membrane For Roads And Bridges
The modified asphalt waterproof membrane for roads and bridges is made of polyester felt as the tire base
Modified Asphalt Waterproof Membrane For High-Speed Rail
The modified asphalt waterproof membrane for high-speed rail is a kind of polymer-modified leaching waterproof membrane made of polymer-modified asphalt as the coating layer
Polyethylene Propylene (Polyester) Nylon Polymer Waterproof Membrane
Polyethylene propylene (polyester) nylon polymer waterproof membrane is mainly based on polypropylene non-woven fabric and polyethylene as the main raw materials
Polyvinyl Chloride (PVC) Waterproof Membrane
Polyvinyl chloride (PVC) waterproof membrane is a kind of polymer waterproof sheet with excellent performance.
Thermoplastic Polyolefin (TPO) Waterproof Membrane
Thermoplastic polyolefin (TPO) waterproof membrane (referred to as TPO waterproof membrane) is made of TPO resin based on the weather resistance
EPDM Rubber Waterproof Membrane
EPDM rubber waterproof membrane adopts the international advanced level of cold-fed extrusion continuous vulcanization process equipment,
Product Consulting
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!