Water-based epoxy asphalt anticorrosive coating is an epoxy polymer anticorrosive and waterproof coating, with epoxy resin as the main material,
Key words:
Classification:
Waterproof Coatingon
Hotline:
E-mail：
Water-Based Epoxy Asphalt Anticorrosive Coating
Water-based epoxy asphalt anticorrosive coating is an epoxy polymer anticorrosive and waterproof coating, with epoxy resin as the main material, and modified high-quality coal coke asphalt, coal tar, corrosion-resistant pigments, and various additives. It is a polymer anticorrosive and waterproof material. It has the advantages of thick coating film, solid and dense coating, good adhesion, tough paint film, high mechanical strength, good chemical resistance, good resistance to microbial erosion, and good electrical insulation properties.
Product features：
◎ The coating is smooth, dense and hard，
◎ Strong adhesion, saline and alkali resistance, seawater resistance, soil microbial corrosion resistance, plant rhizome penetration resistance, etc.
Construction process：
Grassroots requirements：
Cement-based concrete base layer: flat, solid, dry, clean, dust-free, and oil-free.Metal steel structure base layer: sandblasting, power tools, manual: rust removal standard: Sa2.5 or St3.0.
Surface treatment：
To remove oil stains from the surface of steel, it is best to use sandblasting to remove rust to a minimum of Sa2 level, and it is best to reach Sa2 1/2 level.When construction conditions are restricted, tools can also be used to remove rust to St3 level.After the steel surface treatment is qualified, it must be primed as soon as possible before returning to rust (normally within 8h, when the relative humidity of the air exceeds 80%, the primer should be applied immediately).The moisture content of the concrete surface within 20mm is less than 6%, and the loose material is removed, showing a flat and solid surface.
Scope of application：
It is mainly used in the anticorrosion of buried metal pipelines, oil irrigation, marine platforms, docks, mines and underwater steel components, oil tankers, oil refining and chemical equipment, concrete sewage treatment tanks, basements and other buildings.
Previous Page
Previous Page
Special Waterproof Coating For Road And Bridge
Related Products
Elastomer \ Plastomer Modified Asphalt Waterproof Membrane
SBS elastomer modified asphalt waterproof membrane is based on SBS (styrene-butadiene-styrene) thermoplastic elastomer modified asphalt as the dip coating material
Colored asphalt tiles are made of glass fiber felt as the carcass.
Modified Asphalt Waterproof Membrane For Roads And Bridges
The modified asphalt waterproof membrane for roads and bridges is made of polyester felt as the tire base
Modified Asphalt Waterproof Membrane For High-Speed Rail
The modified asphalt waterproof membrane for high-speed rail is a kind of polymer-modified leaching waterproof membrane made of polymer-modified asphalt as the coating layer
Polyethylene Propylene (Polyester) Nylon Polymer Waterproof Membrane
Polyethylene propylene (polyester) nylon polymer waterproof membrane is mainly based on polypropylene non-woven fabric and polyethylene as the main raw materials
Polyvinyl Chloride (PVC) Waterproof Membrane
Polyvinyl chloride (PVC) waterproof membrane is a kind of polymer waterproof sheet with excellent performance.
Thermoplastic Polyolefin (TPO) Waterproof Membrane
Thermoplastic polyolefin (TPO) waterproof membrane (referred to as TPO waterproof membrane) is made of TPO resin based on the weather resistance
EPDM Rubber Waterproof Membrane
EPDM rubber waterproof membrane adopts the international advanced level of cold-fed extrusion continuous vulcanization process equipment,
Product Consulting
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Address: 973 Hedong Road, Huli District, Xiamen City, Fujian Province
Hotline:400-1521-990
Telephone:0592-5228263
Mobile:86-18030303739
E-mail：chenli@chenlifs.com
Website:http://www.chenlifs.com